Schego Temperature Controller TR2

The SCHEGO thermostat with a maximum load of up to 2000 W is easy to operate and is suitable for both hobbyists and professional users.

The water heater is simply plugged into the controller connector and the required temperature is set on the LCD display. The temperature in the aquarium is measured with a temperature sensor (cable length 2 m). The measurement accuracy can be selected from 0.1 ° C to 10.0 ° C in 0.1 ° C steps.

The Schego TR2 thermostat can reliably control both cooling and heating devices. The SCHEGO TR2 thermostat is maintenance-free and suitable for professional use.

SCHEGO TR2 specifications:
power supply: 220-240 V / 50 Hz
Sensor cable length: 2 m
measuring range: -55 to + 125 ° C
accuracy: (adjustable) 0.1 to 10.0 ° C
Load: max. 2000 watts
case dimensions: 60 x 98 x 40 mm
adjustable for heating and cooling
monitoring the sensor for short circuit or open circuit
LCD display for temperature setting, power on socket (relay), sensor error, heating, cooling
display rotates 180 ° using keys
The embedded program is saved even in the event of a power outage