Elevate Quickprime Plus 3.78L

Elevate QuickPrime Plus is used to clean and prime Firestone EPDM membranes prior to the application of QuickSeam Splice Tape.

QuickPrime Plus 0.95 l covers approximately 5 m2.

How to use QuickPrime Plus

The primed surfaces must be clean, dry, free of foreign materials and excess dust. Clean with a broom or rag if necessary.
Stir QuickPrime Plus thoroughly before and during use.
QuickPrime Plus should be applied with a dedicated sponge and QuickScrubber pen. Use long back and forth strokes with moderate to strong pressure along the entire length of the area until the surface is gray with no streaks or puddles.
Allow QuickPrime Plus surfaces to dry completely according to the touch test before applying QuickSeam products or sealant (typically less than 10 minutes; cure time depends on ambient conditions).
Complete QuickSeam product installation or apply sealant per product specifications and details.